Designed as a complete system, this 3" lift includes everything necessary to properly lift your new Wrangler JL while allowing clearance for 35-37" tires. The extra ride height comes from a set of replacement JL-specific coil springs at each corner. These springs are engineered for additional ride height, improved suspension articulation, and to provide an custom-tailored "spring rate" to compensate for the mass of aftermarket wheels/tires and extra gear / off-roading equipment. In additional to replacement coil springs and shocks, this kit includes front lower control arm cam washers to correct caster alignment. Extended-length, heavy-duty front and rear sway bar links are supplied to correct sway bar geometry, while bump stop extensions limit suspension up-travel. Wrapping up this kit is a heavy-duty rear track bar bracket, used to re-center the rear axle and all the necessary hardware required to complete the full install.
Features
- F/R coil springs to set ride height, maintain ride and improve articulation
- Nitro-series gas shocks for smooth on/off-road performance
- F/R extended sway bar links to correct sway bar operating angle
- F/R bump stop extensions to properly limit suspension up travel
- Front LCA cam washers to correct front end caster
- Rear track bar bracket to recenter rear axle
- Allows clearance for 35-37" tires
Specifications
| Rear Lift Height |
3" |
| Rear Lift Method |
Coil Springs |
| Required Tools |
Torx Bit / Socket Set; Wrenches: Standard |
| Requires Metal Cutting |
No |
| Requires Welding |
No |
| Wheel Size |
17 x 9 |
| Accommodates Factory Wheels |
No |
| Adjustable |
No |
| Back Spacing |
4.5" |
| Finish |
Powdercoat |
| Front Lift Height |
3" |
| Front Lift Method |
Coil Springs |
| Installation Difficulty |
2 out of 5 |
| Installation Time |
2.5 hrs |
| Lift Type |
Lift Kit |
| Material |
Steel |
| Max Tire Size |
35 x 12.5 |
Warranty: Limited
Documents
