The easiest halo upgrade for the 2015-2023 Dodge Challenger - ORACLE SMD halos come pre-installed on replacement headlight bezels, mount directly to the outside of your factory lens with genuine 3M VHB adhesive, and require zero cutting, zero baking, and zero headlight disassembly. IP67 waterproof rated. Choose single color or full ColorSHIFT® RGB.
Please note: This product has a processing time of 3-5 business days before shipment.
Product Overview
ORACLE's Pre-Installed Halo Headlight Bezels are the cleanest, most beginner-friendly way to add halos to your 2015-2023 Dodge Challenger. Unlike traditional halo kits that require opening your headlights, baking the housing, and routing wiring through the assembly, these bezels arrive with the halos already installed and wired - ready to mount directly to the outside of your factory headlight lens.
The halos use ORACLE's SMD LED technology encased in a resin-injected housing for an IP67 waterproof rating - fully protected against dust and water immersion. They adhere to the lens surface using genuine 3M VHB (Very High Bond) adhesive tape, the same industrial-grade adhesive used in automotive OEM applications. Every kit includes a free Adhesion Promoter (Part# 2082-504) to maximize bond strength before application.
Power is supplied via wide voltage external LED drivers and quick connect wiring adapters - making the electrical connection as simple as plugging in a connector. Wire to a controller, a switch, or your parking light harness depending on your preferred setup.
Available in Red, Amber, or ColorSHIFT® RGB with your choice of controller - from no controller (bring your own) up to the full BC2 Bluetooth app-controlled experience.
Key Features
-
Pre-installed halos - SMD LEDs factory-installed on replacement bezels, no DIY halo mounting required
-
Direct-to-lens surface mounting - adheres to outside of factory headlight lens, no disassembly
-
No cutting / no baking - the easiest halo install method available for the Challenger
-
IP67 waterproof rating - resin-injected SMD halos fully sealed against dust and water
-
Genuine 3M VHB adhesive backing - industrial-grade bond strength
-
Free Adhesion Promoter included - Part# 2082-504, maximizes adhesive bond
-
Quick connect wiring adapters - plug-and-play electrical connection
-
Wide voltage external LED drivers - stable power delivery across voltage range
-
12V powered - wire to controller, switch, or parking light harness
-
ColorSHIFT® RGB option - full color control with compatible controller
-
1-year warranty (LED and driver components)
Warranty covers LED and driver components. UV damage, oxidation, or environmental hard-part decay are not covered.
Why Pre-Installed Bezels vs. a DIY Halo Kit?
Traditional halo kits require opening your headlight housing - which means baking the assembly in an oven to soften the sealant, carefully prying it apart, routing wires through the housing, and resealing everything. It's doable, but it's a multi-hour job with real risk of damaging the lens or housing if done incorrectly.
Pre-installed bezels eliminate all of that:
No Headlight Disassembly
Halos mount to the outside of the lens. Your headlight housing stays sealed and untouched.
~1 Hour Install
Clean the lens, apply adhesion promoter, press and hold, connect the wiring. Most installs are done in under an hour.
IP67 Waterproof
Resin-injected SMD halos are fully sealed - more durable than many internally-mounted halo kits.
Beginner-Friendly
No special tools, no oven, no risk of cracking the lens. If you can clean a surface and plug in a connector, you can install these.
App & Controller Compatibility
ColorSHIFT® variants require a controller to operate. Choose the option that best fits your setup:
-
No Controller (7739-334): Halos only - bring your own compatible ColorSHIFT® controller
-
Simple Controller (7739-504): Basic on/off and color selection - entry-level control
-
RF Controller (7739-330): Wireless RF remote - color, brightness, and pattern control
-
2.0 Controller (7739-333): Advanced wireless remote with expanded color and pattern options
-
BC2 Controller (7739-335): Bluetooth smartphone app control - full color, patterns, brightness, music sync via ColorSHIFT® PRO app
The BC2 Bluetooth controller is the most popular choice - it unlocks the full ColorSHIFT® PRO app experience including music-reactive modes.
Performance & Technical Specifications
-
Fitment: 2015-2023 Dodge Challenger
-
Halo Type: SMD LED - Resin Injected
-
Waterproof Rating: IP67
-
Mounting Method: Direct-to-Lens Surface Mount
-
Adhesive: Genuine 3M VHB (Very High Bond)
-
Wiring: Quick Connect Adapters + Wide Voltage External LED Drivers
-
Operating Voltage: 12V DC
-
Color Options: Red, Amber, ColorSHIFT® RGB
-
Processing Time: 3-5 Business Days
-
Warranty: 1 Year (LED & Driver Components)
Vehicle Fitment
Vehicle Year Range: 2015-2023
- 2015 Dodge Challenger
- 2016 Dodge Challenger
- 2017 Dodge Challenger
- 2018 Dodge Challenger
- 2019 Dodge Challenger
- 2020 Dodge Challenger
- 2021 Dodge Challenger
- 2022 Dodge Challenger
- 2023 Dodge Challenger
What's Included
- (2) 2015-2023 Dodge Challenger Headlight Bezels with Pre-Installed ORACLE SMD Halo Rings
- (4) ORACLE Surface Mount Waterproof Headlight Halo Rings (pre-installed)
- (4) Quick Connect Wiring Adapters
- (4) Wide Voltage External LED Drivers
- Free Adhesion Promoter - Part# 2082-504
- ColorSHIFT® Controller (included with applicable variants)
