Forced Performance Subaru STi/WRX Blue Turbo BB LOPE 58mm CH8 CM Turbine Hsg External WG w/Oil Line - 2024010

New for 2023! From this quest, the Low Oil Pressure Endurance (L.O.P.E.) Ball Bearing units were born. Forced Performance has tested these on everything from 120+ psi balance shaft deleted 4g63's down to sad 7psi hot idle EJ25's and everything in between.

These are insensitive to pressure issues and oil pick problems in high g force applications and will live a very long life in adverse conditions compared to a journal bearing turbo.

Oil supply line and gasket set included!

FP Blue™

• Compressor wheel - 73HTZ
• Flow rating - 57LB per minute
• CW Measurements - 52.6MM Inducer / 73MM Exducer
• TW Measurements - 60.8MM Inducer / 54MM Exducer
• Compressor Housing - 58MM Stock Appearing Cover
• Turbine Housing - FP 8CM Turbine Housing
• CHRA - L.O.P.E. Ball Bearing
• Oil Line - Included

The

L.O.P.E. FP Blue™

turbocharger features the 73mm

HTZ™

compressor section with Forced Performance's 58MM stock appearing cover coupled to the 8cm

turbine section. The

flows 57LB a minute and is capable of producing upwards of 475WHP. This turbo is available with either a stock style internal wastegate actuator or set up for an external. While this turbo looks like the JB Blue, it has some major tricks up its sleeve!

Attention

THIS PRODUCT IS FOR COMPETITION USE ONLY. ALL OTHER USES ARE CONTRARY TO FEDERAL LAW. IF YOU INTEND TO USE THIS PRODUCT FOR HIGHWAY OR NON-COMPETITION OFF-ROAD PURPOSES DO NOT PURCHASE OR INSTALL THIS PRODUCT.