Forced Performance FP7275 Turbocharger w/T4 .96 A/R Turbine Housing TiAL F38 WG Provision - 2757275A96WG

NEW for 2023, FP Stainless Steel Vband Housing available in a 1.02 for fantastic max effort flow!

Now available with optional F38 Wastegate turbine housing for easy boost control!

*Limited batch of coated compressor covers available*

FP7275

• Flow rating - 100LB per minute
• CW Measurements - 72MM Inducer
• TW Measurements - 75MM Exducer
• Compressor Housing - 4" Inlet and 3" Outlet
• Turbine Housing - T4 Open .81 or .96 A/R, T4 Divided 1.25
• Turbine Outlet Flange - 3 5/8" V-Band discharge
• CHRA - FP Journal Bearing

The FP7275 Race Turbocharger from Forced Performance is a great turbo for stock to mildly built LS motors.

With its billet compressor wheel and 75mm turbine exducer, you can expect to see between 500 and 750 horsepower from a single turbo application, or up to 1500 in a twin setup.

Forced Performance offers this in several different T4 turbine housings, a .81 A/R and a .96 A/R open, and a 1.25 divided. Forced Performance recommends the .81 for smaller motors or twin setups, while the .96 responds very well on a larger motor such as a 5.3 or such applications that use a larger cam than stock. The 1.25 is great for higher flow applications, whether it is a larger displacement or higher stall.

Additionally these are offered with an integrated TiAL F38 flange already ported and ready for action! Forced Performance offers the F38 setup in either a .81 or .96 A/R.

*wastegate shown for fitment purposes only*