SKU: SKU: EDE2216
Edelbrock Rollin' Thunder Camshaft #2216 is designed for LS1/LS6 Gen III Chevy's from 1997-04 and produces optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 460HP and 424 Ft Lbs of Torque when paired with Performer RPM Intake manifold #71187, Thunder Series AVS Carb #1813 and E-CNC 215 cylinder heads #79949. Use with high stall torque converter only. Camshaft specifications: - Intake duration: 230 Degrees - Exhaust duration: 237 Degrees - Intake lift: .540" - Exhaust lift: .540" - Lobe separation: 110 Degree - Intake Center Line: 106 Degree - Vacuum: 10"
Edelbrock Rollin' Thunder camshaft #2216 is designed for LS1/LS6 Gen III Chevy's from 1997-04 and produces optimum torque from the low-end to the mid-range.
| Advertised Exhaust Duration | 322 DD |
| Intake Valve Lift with Factory Rocker Arm Ratio | 0.540 IN |
| Advertised Intake Duration | 314 DD |
| Lobe Separation | 110 DD |
| Intake Valve Lift | 0.318 IN |
| Exhaust Duration at .050 inch Lift | 237 DD |
| Exhaust Valve Lift with Factory Rocker Arm Ratio | 0.540 IN |
| Cam Type | Roller |
| Computer Controlled Compatible | Yes |
| Lifter Type | Roller |
| Exhaust Valve Lift | 0.318 IN |
| Intake Duration at .050 Inch Lift | 314 DD |
California Prop 65 Warning: WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.