SKU: SKU: EDE7106
Edelbrock part #7106 Performer RPM Camshaft is designed for Ford FE 390-428 V-8 applications. This Edelbrock cam kit produced 418 HP & 434 ft-lbs. of torque when used with #7105 intake and #60069 cylinder heads on a 390 engine. The camshaft works well with high-performance's street applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft. Camshaft Specifications: - Duration @ .050 Intake: 236 degrees - Duration @ .050 Exhaust: 236 degrees - Lift @ Valve Intake: .572" - Lift @ Valve Exhaust: .572" - Lobe Separation: 108 Degrees - Intake Centerline: 103 Degrees - Idle Vacuum @ 1000 RPM's: 11"
| Intake Valve Lift | 0.572 IN |
| Exhaust Duration at .050 inch Lift | 236 DD |
| Exhaust Valve Lift | 0.572 IN |
| Computer Controlled Compatible | No |
| Advertised Intake Duration | 296 DD |
| Lifter Type | Hydraulic |
| Cam Type | Cast |
| Advertised Exhaust Duration | 296 DD |
| Lobe Separation | 108 DD |
| Grade Type | Performance |
| Lifter Materials | Hardened Steel |
| Intake Duration .050 Inch Lift | 236 DD |
California Prop 65 Warning: WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.