SKU: SKU: EDE7122
Edelbrock part #7122 Performer RPM Camshaft is designed for small-block Ford 289-302 V-8 applications. This Edelbrock cam kit produced 367 HP & 340 ft-lbs. of torque when used with #7121 intake and #60259 cylinder heads on a 302 engine. The camshaft works well with high-performance's street applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft. Camshaft Specifications: - Duration @ .050 Intake: 224 degrees - Duration @ .050 Exhaust: 234 degrees - Lift @ Valve Intake: .496" - Lift @ Valve Exhaust: .520" - Lobe Separation: 112 Degrees - Intake Centerline: 107 Degrees - Idle Vacuum @ 1000 RPM's: 11"
| Lifter Type | Hydraulic |
| Exhaust Valve Lift | 0.520 IN |
| Advertised Exhaust Duration | 300 DD |
| Exhaust Duration at .050 inch Lift | 234 DD |
| Advertised Intake Duration | 290 DD |
| Intake Valve Lift | 0.496 IN |
| Intake Duration .050 Inch Lift | 224 DD |
| Cam Type | Cast |
| Lobe Separation | 112 DD |
| Grade Type | Performance |
| Lifter Materials | Hardened Steel |
| Computer Controlled Compatible | No |
California Prop 65 Warning: WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.