SKU: SKU: EDE7177
Edelbrock part #7177 Performer RPM Camshaft is designed for small-block Chrysler 318-340-360 V-8 applications. This Edelbrock cam kit produced 417 HP & 397 ft-lbs. of torque when used with #7176 intake and #60779 cylinder heads on a 340 engine. The camshaft works well with high-performance's street applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft. Camshaft Specifications: - Duration @ .050 Intake: 234 degrees - Duration @ .050 Exhaust: 244 degrees - Lift @ Valve Intake: .488" - Lift @ Valve Exhaust: .510" - Lobe Separation: 112 Degrees - Intake Centerline: 107 Degrees
Edelbrock part #7177 Performer RPM Camshaft is designed for small-block Chrysler 318-340-360 V-8. This Edelbrock cam kit produced 417 HP & 397 ft-lbs. of torque when used with #7176 intake and #60779 cylinder heads on a 340 engine.
| Exhaust Valve Lift | 0.510 IN |
| Exhaust Duration at .050 inch Lift | 244 DD |
| Lifter Type | Hydraulic |
| Advertised Intake Duration | 308 DD |
| Grade Type | Performance |
| Intake Duration .050 Inch Lift | 234 DD |
| Cam Type | Cast |
| Lobe Separation | 112 DD |
| Computer Controlled Compatible | No |
| Intake Valve Lift | 0.488 IN |
| Advertised Exhaust Duration | 318 DD |
| Lifter Materials | Hardened Steel |
California Prop 65 Warning: WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.