SKU: SKU: EDE3712
Edelbrock part #3712 Performer-Plus camshaft is designed for small-block Oldsmobile 350-403 V-8 applications. This Edelbrock cam kit produced 330 ft-lbs. of torque when used with #3711 intake and stock iron cylinder heads on a 350 engine. The camshaft will produce optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. This Performer-Plus is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. All camshafts include flat tappet lifters, assembly lube and instructions. Camshaft Specifications: - Duration @ .050 Intake: 204 degrees - Duration @ .050 Exhaust: 214 degrees - Lift @ Valve Intake: .449" - Lift @ Valve Exhaust: .473" - Lobe Separation: 114 Degrees - Intake Centerline: 106 Degrees - Idle Vacuum @ 1000 RPM's: 16"
| Cam Type | Cast |
| Exhaust Valve Lift | 0.472 IN |
| Advertised Intake Duration | 280 DD |
| Advertised Exhaust Duration | 290 DD |
| Intake Valve Lift | 0.448 IN |
| Exhaust Duration at .050 inch Lift | 204 DD |
| Computer Controlled Compatible | No |
| Lobe Separation | 114 DD |
| Lifter Type | Hydraulic |
| Intake Duration .050 Inch Lift | 204 DD |
| Grade Type | Performance |
| Lifter Materials | Hardened Steel |
California Prop 65 Warning: WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.