SKU: SKU: EDE2213
The Edelbrock Rollin? Thunder Camshaft #2213 for 273-360 CID Chrysler small-block engines is a high-performance hydraulic roller cam for street or strip applications. With an RPM range of 2,500 to 6,200 RPM, this cam has been dyno-tested to deliver substantial gains at the 4,000 RPM mark. The #2213 Rollin? Thunder Camshaft produces a rough idle with an intake lift of .544 inch, exhaust lift of .541 inch, 286/294 degrees duration, 236/242 degrees duration at .050-inch lift, and a lobe separation angle of 110 degrees. We recommend our Performer RPM #60775 Cylinder Heads, #7177 RPM Air-Gap Intake Manifold and #1906 AVS2 Carburetor with this combination. Engine assembly lube included.
Edelbrock Rollin' Thunder Hydraulic Roller Camshaft #2213 for Chrysler 273-360 V8 engines
| Lobe Separation | 110 DD |
| Exhaust Timing at .050 inch Lift | Opens: 44.0 BBDC; Closes: 7.0 ATDC |
| Intake Timing at .050 inch Lift | Opens: 12.0 BTDC; Closes: 55.0 ABDC |
| Advertised Intake Duration | 286 DD |
| Exhaust Valve Lift | 0.541 IN |
| Intake Duration at .050 Inch Lift | 236 DD |
| Intake Valve Lift with Factory Rocker Arm Ratio | 0.544 IN |
| Exhaust Duration at .050 inch Lift | 242 DD |
| Exhaust Cam Lift at Lobe | 0.361 IN |
| Intake Valve Lift | 0.544 IN |
| Intake Cam Lift at Lobe | 0.363 IN |
| Advertised Exhaust Duration | 294 DD |
| Intake Center Line | 106 |
| Quantity | Sold Individually |
| Cam Type | Hydraulic Roller |
| Exhaust Valve Lift with Factory Rocker Arm Ratio | 0.541 IN |
| Lifter Type | Hydraulic Roller |
| Basic Operating RPM Range | 2500-6200 R3 |
| Computer Controlled Compatible | No |
California Prop 65 Warning: WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.