SKU: SKU: CCA8409-16
Hi-Tech 7.700" Long, .105" Wall, 5/16" Diameter Pushrod Set
Constructed from one piece of seamless .105" wall chromemoly steel then black oxide coated and heat-treated, these 7.700" long Hi-Tech 5/16" diameter pushrods are 17% stiffer than .080" wall Hi-Tech pushrods.
With a 17 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech .105 Wall pushrods feature seamless chromemoly tubing that ensures even greater strength and durability. To ensure the same oil flow as standard Pushrods, the .105 Hi-Tech pushrods have the same diameter oil holes. Available in lengths from 6.250" to 8.200", they are OD ground for consistency and black-oxide finished with laser-etched length and part number for easy identification.
Prior to extensive research at COMP Cams, it was thought that the pushrod only had to be strong enough not to fail, bend or burn up at the ends. But our engineers have learned that the frequency of the pushrod must match that of all the rest of the parts in the valve train, as well as the RPM at which the engine will be run. Todays all-out race engines demand the highest quality components at every step, and COMP Cams Hi-Tech Pushrods fill that requirement. The one-piece design from .080" wall seamless chromemoly tubing ensures the ultimate in strength and durability. The ends are precision formed, yielding added thickness in the critical tip area for strength while maintaining constant wall thickness and concentricity. The pushrods are then heat-treated to ensure compatibility with guide plates and for maximum strength. They are OD-ground for consistency and black oxide finished with a length and part number laser etched on the OD for ease of identification.
Prior to extensive research at COMP Cams, it was thought that the pushrod only had to be strong enough not to fail, bend or burn up at the ends. But our engineers have learned that the frequency of the pushrod must match that of all the rest of the parts in the valve train, as well as the RPM at which the engine will be run. Todays all-out race engines demand the highest quality components at every step, and COMP Cams Hi-Tech Pushrods fill that requirement. The one-piece design from .080" wall seamless chromemoly tubing ensures the ultimate in strength and durability. The ends are precision formed, yielding added thickness in the critical tip area for strength while maintaining constant wall thickness and concentricity. The pushrods are then heat-treated to ensure compatibility with guide plates and for maximum strength. They are OD-ground for consistency and black oxide finished with a length and part number laser etched on the OD for ease of identification.