ICON's Vehicle Specific (V.S.) 2.5 Series coilover shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON shock absorbers, V.S. 2.5 Series shocks are 100% rebuildable and 100% revalveable.
Features
- Adjustable coilovers yield 0-3.5" of front lift height
- Increased wheel travel and vehicle specific valving provides unrivaled ride quality across a wide range of on and off-road use
- Superior low speed control reduces body roll and increases on-road stability
- High quality ICON-engineered coil springs are guaranteed for life against sagging or breakage
- Corrosion resistant CAD plated shock body with 7/8" shaft
- FK Rod End bearings provide extended longevity and minimal deflection
- Fully serviceable design allows for revalves, rebuilds, and an immeasurable service life
- Bolt-in design makes for an easy install into OEM shock location
Factory Wheels & Tires Fitment: Yes
Recommended Aftermarket Wheels: ICON Alloys - 17x8.5 w/ 4.75" Backspace / 0mm Offset
Recommended Aftermarket Wheels: ICON Alloys - 18x9 w/ 5" Backspace / 0mm Offset
Recommended Aftermarket Tires: 33" x 11.50" (Larger Tires May Fit but Fender Trimming and Modifications will be Required)
Specifications
| Remote Reservoir |
NO |
| Reservoir Style |
Internal |
| Self-Leveling |
No |
| Service Parts |
252003 - SEAL INSTALL TOOL 2.5/3.0 |
| Service Parts |
252010 - 2.5 IFP REBUILD KIT |
| Service Parts |
254100G - 1 GALLON ICON PERFORMANCE SHOCK OIL |
| Service Parts |
611019 - COILOVER HARDWARE KIT PAIR |
| Service Parts |
257301 - 7/8 SHAFT 10.25 OAL, 6.00 TRAVEL |
| Service Parts |
252002 - UNIVERSAL SPANNER WRENCH (2.0/2.5/3.0) |
| Service Parts |
252001 - 2.5 FIXED SPANNER WRENCH |
| Service Parts |
252004 - ECONOMY NEEDLE CHARGING TOOL |
| Service Parts |
611067 - TACOMA/FJ/4RNR LOWER CO BRG/SPCR KIT |
| Shaft Diameter |
0.875 IN |
| Shock Absorber Body End Measuring Point |
Top of Upper Mount Plate |
| Shock Absorber Rod End Measuring Point |
Center of Eylet |
| Spring Rate |
650 PPI |
| Spring Rate Type |
Linear |
| Travel Length |
4.76 IN |
| Upper Mount Type |
Mounting Plate |
| Valving Type |
Digressive |
| Add-On Part |
191003 - ICON SHORT 2.5 COIL WRAP W/LOGO PAIR (11.25-12.25) |
| Add-On Part |
198001 - BILLET SPANNER WRENCH KIT |
| Add-On Part |
198000 - 2 PIN COILOVER SPANNER WRENCH KIT |
| Add-On Part |
51051 - 05-23 TACOMA/03-24 T4R/07-14 FJ FRONT SWAY BAR LINK KIT |
| Adjustable Damping |
NO |
| Body Diameter |
2.5 IN |
| Coil Over Springs Included |
Yes |
| Compressed Length |
17.42 IN |
| Cylinder Color |
Silver |
| Cylinder Finish |
Cadmium Plated |
| Damping Type |
Oil |
| Extended Length |
22.17 IN |
| Gas Charged |
yes |
| Lower Mount Type |
Eyelet |
| Material |
Aluminum |
| Maximum Lift |
3.5 IN |
| Minimum Lift |
0 IN |
| OEM Wheels & Tires Fitment |
Yes |
| Recommended Aftermarket Tires |
33" x 11.50" (Larger Tires May Fit but Fender Trimming and Modifications will be Required) |
| Recommended Aftermarket Wheels |
ICON Alloys - 20x9" w/ 5” Backspace / 0mm Offset |
| Recommended Aftermarket Wheels |
ICON Alloys - 17x8.5" w/ 4.75” Backspace / 0mm Offset |
| Recommended Aftermarket Wheels |
ICON Alloys - 18x9" w/ 5” Backspace / 0mm Offset |
Documents
⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.