VMP '07-'14 GT500 & '11-'17 Coyote Street Intercooler upgrade
This intercooler upgrade includes:
- VMP Intercooler core
- Loctite
- M6 x 20 mm flange head bolts (10)
- Support rails (2)
- VMP-SUC030 1" to 3/4" Long floating transfer tubes for GT500 with stock water manifold
- VMP-SUC029 1" to 3/4" short floating tubes for Coyote/Raptor with stock water manifold
- Must purchase 1" short or long floating transfer tubes when using with VMP water manifolds (SUC017 or SUC027)
Specifications:
- 13 cooling rows vs 12 stock
- 1" in/out ports vs 3/4" stock
- 123 mm wide vs 110 mm stock
- 8% increase in airflow
- 12% increase in core volume
- 15% increase in water flow (with supporting mods)
- 16 FPI lanced offset
- LD style core
Applications this intercooler will fit:
- 07-12 Mustang Shelby GT500 5.4 L 4v supercharged
- 13-14 Mustang Shelby GT500 5.8 L 4v supercharged
- 08-10 Roush 4.6 L 3v supercharged (P51A, P51B, Roush Hammer 540RH, and 4.6 L 3v cars with the Roush R2300 kit )
- 11-17 Mustang GT/Roush/F-150 5.0 L 4v supercharged
- 11-14 Raptor 6.2 L with Roush supercharger Phase 1 (421246) or Phase 2 (421432)
Upgrade / Replacement for the following Part Numbers:
- M-6775-MSVT
- R07060144-13-AA
- 7R3Z-6K775-AA (07-12)
- DR3Z-6K775-A (13-14)
Dimensions:
- 286 mm core length
- 118 mm core depth
- 123 mm core height
- 28.58 mm water in/out
***This intercooler will only fit the above OEM intakes from Ford/Roush. The will NOT fit an aftermarket lower intake.
***If you have the J2 Flow Mod on your 2007-2014 GT500, then you will need 2 of the VMP-SUC043.
This intercooler is 50 State Legal. E.O. D-846-1
