{"product_id":"oracle-15-23-dodge-challenger-pre-installed-led-halo-headlight-bezel-red","title":"Oracle 15-23 Dodge Challenger Pre-Installed LED Halo Headlight Bezel - Red - 7739-003","description":"\u003cp\u003eThe easiest halo upgrade for the 2015-2023 Dodge Challenger - ORACLE SMD halos come pre-installed on replacement headlight bezels, mount directly to the outside of your factory lens with genuine 3M VHB adhesive, and require zero cutting, zero baking, and zero headlight disassembly. IP67 waterproof rated. Choose single color or full ColorSHIFT® RGB.\u003c\/p\u003e\n\u003cp\u003e\n Please note: This product has a processing time of \u003cstrong\u003e3-5 business days\u003c\/strong\u003e before shipment.\n\u003c\/p\u003e\n\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eORACLE's Pre-Installed Halo Headlight Bezels are the cleanest, most beginner-friendly way to add halos to your 2015-2023 Dodge Challenger. Unlike traditional halo kits that require opening your headlights, baking the housing, and routing wiring through the assembly, these bezels arrive with the halos \u003cstrong\u003ealready installed and wired\u003c\/strong\u003e - ready to mount directly to the outside of your factory headlight lens.\u003c\/p\u003e\n\u003cp\u003eThe halos use ORACLE's \u003cstrong\u003eSMD LED technology\u003c\/strong\u003e encased in a resin-injected housing for an \u003cstrong\u003eIP67 waterproof rating\u003c\/strong\u003e - fully protected against dust and water immersion. They adhere to the lens surface using \u003cstrong\u003egenuine 3M VHB (Very High Bond) adhesive tape\u003c\/strong\u003e, the same industrial-grade adhesive used in automotive OEM applications. Every kit includes a \u003cstrong\u003efree Adhesion Promoter (Part# 2082-504)\u003c\/strong\u003e to maximize bond strength before application.\u003c\/p\u003e\n\u003cp\u003ePower is supplied via \u003cstrong\u003ewide voltage external LED drivers\u003c\/strong\u003e and \u003cstrong\u003equick connect wiring adapters\u003c\/strong\u003e - making the electrical connection as simple as plugging in a connector. Wire to a controller, a switch, or your parking light harness depending on your preferred setup.\u003c\/p\u003e\n\u003cp\u003eAvailable in \u003cstrong\u003eRed\u003c\/strong\u003e, \u003cstrong\u003eAmber\u003c\/strong\u003e, or \u003cstrong\u003eColorSHIFT® RGB\u003c\/strong\u003e with your choice of controller - from no controller (bring your own) up to the full BC2 Bluetooth app-controlled experience.\u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-installed halos\u003c\/strong\u003e - SMD LEDs factory-installed on replacement bezels, no DIY halo mounting required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-to-lens surface mounting\u003c\/strong\u003e - adheres to outside of factory headlight lens, no disassembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo cutting \/ no baking\u003c\/strong\u003e - the easiest halo install method available for the Challenger\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67 waterproof rating\u003c\/strong\u003e - resin-injected SMD halos fully sealed against dust and water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine 3M VHB adhesive backing\u003c\/strong\u003e - industrial-grade bond strength\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree Adhesion Promoter included\u003c\/strong\u003e - Part# 2082-504, maximizes adhesive bond\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick connect wiring adapters\u003c\/strong\u003e - plug-and-play electrical connection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide voltage external LED drivers\u003c\/strong\u003e - stable power delivery across voltage range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12V powered\u003c\/strong\u003e - wire to controller, switch, or parking light harness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColorSHIFT® RGB option\u003c\/strong\u003e - full color control with compatible controller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-year warranty\u003c\/strong\u003e (LED and driver components)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e Warranty covers LED and driver components. UV damage, oxidation, or environmental hard-part decay are not covered.\u003c\/p\u003e\n\u003ch4\u003eWhy Pre-Installed Bezels vs. a DIY Halo Kit?\u003c\/h4\u003e\n\u003cp\u003eTraditional halo kits require opening your headlight housing - which means baking the assembly in an oven to soften the sealant, carefully prying it apart, routing wires through the housing, and resealing everything. It's doable, but it's a multi-hour job with real risk of damaging the lens or housing if done incorrectly.\u003c\/p\u003e\n\u003cp\u003ePre-installed bezels eliminate all of that:\u003c\/p\u003e\u003cp\u003e\n\u003cstrong\u003eNo Headlight Disassembly\u003c\/strong\u003e\n\u003c\/p\u003e\u003cp\u003eHalos mount to the outside of the lens. Your headlight housing stays sealed and untouched.\u003c\/p\u003e\u003cp\u003e\n\u003cstrong\u003e~1 Hour Install\u003c\/strong\u003e\n\u003c\/p\u003e\u003cp\u003eClean the lens, apply adhesion promoter, press and hold, connect the wiring. Most installs are done in under an hour.\u003c\/p\u003e\u003cp\u003e\n\u003cstrong\u003eIP67 Waterproof\u003c\/strong\u003e\n\u003c\/p\u003e\u003cp\u003eResin-injected SMD halos are fully sealed - more durable than many internally-mounted halo kits.\u003c\/p\u003e\u003cp\u003e\n\u003cstrong\u003eBeginner-Friendly\u003c\/strong\u003e\n\u003c\/p\u003e\u003cp\u003eNo special tools, no oven, no risk of cracking the lens. If you can clean a surface and plug in a connector, you can install these.\u003c\/p\u003e\n\u003ch3\u003eApp \u0026amp; Controller Compatibility\u003c\/h3\u003e\n\u003cp\u003eColorSHIFT® variants require a controller to operate. Choose the option that best fits your setup:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo Controller (7739-334):\u003c\/strong\u003e Halos only - bring your own compatible ColorSHIFT® controller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSimple Controller (7739-504):\u003c\/strong\u003e Basic on\/off and color selection - entry-level control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRF Controller (7739-330):\u003c\/strong\u003e Wireless RF remote - color, brightness, and pattern control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.0 Controller (7739-333):\u003c\/strong\u003e Advanced wireless remote with expanded color and pattern options\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBC2 Controller (7739-335):\u003c\/strong\u003e Bluetooth smartphone app control - full color, patterns, brightness, music sync via ColorSHIFT® PRO app\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e The BC2 Bluetooth controller is the most popular choice - it unlocks the full ColorSHIFT® PRO app experience including music-reactive modes.\u003c\/p\u003e\n\u003ch3\u003ePerformance \u0026amp; Technical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2015-2023 Dodge Challenger\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHalo Type:\u003c\/strong\u003e SMD LED - Resin Injected\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterproof Rating:\u003c\/strong\u003e IP67\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Method:\u003c\/strong\u003e Direct-to-Lens Surface Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesive:\u003c\/strong\u003e Genuine 3M VHB (Very High Bond)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Quick Connect Adapters + Wide Voltage External LED Drivers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 12V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor Options:\u003c\/strong\u003e Red, Amber, ColorSHIFT® RGB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcessing Time:\u003c\/strong\u003e 3-5 Business Days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year (LED \u0026amp; Driver Components)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cp\u003e\n\u003cstrong\u003eVehicle Year Range:\u003c\/strong\u003e 2015-2023\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2015 Dodge Challenger\u003c\/li\u003e\n\u003cli\u003e2016 Dodge Challenger\u003c\/li\u003e\n\u003cli\u003e2017 Dodge Challenger\u003c\/li\u003e\n\u003cli\u003e2018 Dodge Challenger\u003c\/li\u003e\n\u003cli\u003e2019 Dodge Challenger\u003c\/li\u003e\n\u003cli\u003e2020 Dodge Challenger\u003c\/li\u003e\n\u003cli\u003e2021 Dodge Challenger\u003c\/li\u003e\n\u003cli\u003e2022 Dodge Challenger\u003c\/li\u003e\n\u003cli\u003e2023 Dodge Challenger\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(2) 2015-2023 Dodge Challenger Headlight Bezels with Pre-Installed ORACLE SMD Halo Rings\u003c\/li\u003e\n\u003cli\u003e(4) ORACLE Surface Mount Waterproof Headlight Halo Rings (pre-installed)\u003c\/li\u003e\n\u003cli\u003e(4) Quick Connect Wiring Adapters\u003c\/li\u003e\n\u003cli\u003e(4) Wide Voltage External LED Drivers\u003c\/li\u003e\n\u003cli\u003eFree Adhesion Promoter - Part# 2082-504\u003c\/li\u003e\n\u003cli\u003eColorSHIFT® Controller (included with applicable variants)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ORACLE Lighting","offers":[{"title":"Default Title","offer_id":53358513783147,"sku":"ORL7739-003","price":547.4,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/9690\/4998\/files\/b3d7a4cc2fda696d6cdf2ef62bbcdfd6L.jpg?v=1780919760","url":"https:\/\/www.raptorracing.ca\/products\/oracle-15-23-dodge-challenger-pre-installed-led-halo-headlight-bezel-red","provider":"Raptor Racing","version":"1.0","type":"link"}