{"title":"ADVFiberglass","description":"\u003cp\u003eADVFiberglass works in composite exterior panels, the wide arches, bumpers and lips that redefine a car's proportions. Body kit work is as much about mounting accuracy and panel gap as it is about shape, which is where composite specialists earn their reputation. Find ADVFiberglass at Raptor Racing, your top choice for performance car parts.\u003c\/p\u003e","products":[{"product_id":"adv-fiberglass-concepts-2021-2022-ford-bronco-heat-extractor-hood","title":"ADV Fiberglass Concepts - 2021-2022 FORD BRONCO HEAT EXTRACTOR HOOD","description":"\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eOversized Shipping:  Please note these items require LTL or Oversized shipping from ADV Fiberglass to our shop, This cost has been built into the pricing displayed on the site. \u003cbr\u003eThe price displayed on the site is for in-store pickup, please contact us if you need this item shipped. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003clabel id=\"details\" for=\"ac0\"\u003eDetails\u003c\/label\u003e\u003c\/p\u003e\n\u003carticle\u003e\n\u003cp\u003eOur aftermarket Ford Hood for 2021-2022 Ford Broncos are handcrafted right here in America to ensure the kind of quality, durability, and craftsmanship you’ve come to expect from Advanced Fiberglass Concepts. Each Bronco fiberglass hood is made specifically for your model and year and designed for a seamless transition between the factory panels and our aftermarket body panels. This Bronco hood are is perfect match with our \u003ca href=\"https:\/\/www.advfiberglass.com\/collections\/ford\/products\/2021-ford-bronco-sasquatch-flares\"\u003e2021 Ford Bronco Sasquatch Flares \u003c\/a\u003e. Carbon Finish Options are in the vent section only. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003eHeat-extractor hood\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eFiberglass hood is hand-laid in America to ensure quality\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eMolded specifically to replace Sierra hood\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eDesigned to be long-lasting even during the toughest rides and climates\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cspan style=\"font-weight: 400;\"\u003eMade in the\u003c\/span\u003e\u003cstrong\u003e USA\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eComes standard in semi-gloss white\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ePart Number: AFC 178 (Fiberglass), AFC 178-CFV (Carbon Fiber Vents), + AFC 178-FCFV (Forged Carbon Fiber Vents) \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube-nocookie.com\/embed\/yybOV7tTi5Q\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\" data-mce-fragment=\"1\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eINSTALLATION INSTRUCTIONS - Hood\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll of our products are fairly easy to install. You will need a few hand tools and a few hours of time, depending on the products you have purchased. Advanced Fiberglass Concepts LLC does recommend that a professional install for a seamless fit install these products.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eTools required for most install:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocket set\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eStep 1: Open stock hood and remove bolts holding the hood down.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eStep 2: Remove stock hood from vehicle. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eStep 3: Test fit our aftermarket hood by resting it on the hinge plates. Align it on each side to have appropriate lines. Keep in mind that the hood will sit high if it is not bolted down. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eStep 4: Open the hood, tighten the bolts on the hinge plates to fasten the hood down and close the hood.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eStep 5: After closing the hood, it may require to be adjusted to get appropriate lines. Start by opening the hood to loosen the back hinge plate bolts and close the hood. Pull the hood in the direction you would like (To help make the body lines consistent from driver to passenger side). Slightly open the hood (Make sure to not move it otherwise you will need to restart this step) and tighten the back hinge plate bolts (using the factory nuts) \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eStep 6: Repeat step 5 for the front latch with M6 bolts to tighten the hood in place. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eYou will need to be patient to get a good fit. If the hood sits too low or too high in the front, you can adjust it by turning up or down the rubber height adjuster at the front of the hood located in the core support, or hood. If you need to adjust the back of the hood then loosen the three bolts that are holding the hinge plate to the chassis and push the hinge plate mechanism down and tighten the bolts. This will pull the back of the hood down to align with the fenders. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThese instructions are useful for all hoods sold by Advanced Fiberglass Concepts.—therefore some of the steps may not be needed or should be slightly altered to suit your particular vehicle and product needs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThank you for purchasing our product(s). We hope you are satisfied with the final result.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/article\u003e","brand":"ADVFiberglass","offers":[{"title":"Fiberglass","offer_id":44093183820070,"sku":"ADV Fiberglass Concepts - AFC 178-F","price":1909.37,"currency_code":"CAD","in_stock":true},{"title":"Carbon Fiber","offer_id":44093183852838,"sku":"ADV Fiberglass Concepts -AFC 178- CFV","price":3205.01,"currency_code":"CAD","in_stock":true},{"title":"Forged Carbon Fiber","offer_id":44093183885606,"sku":"ADV Fiberglass Concepts - AFC 178- FCFV","price":3341.39,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/9690\/4998\/products\/image_1f15333c-2fcf-4e3e-9f5c-e924854dd225_800x800_crop_center_1.png?v=1670635367"},{"product_id":"adv-fiberglass-2021-2022-ford-bronco-ram-air-hood","title":"ADV Fiberglass 2021-2022 FORD BRONCO RAM AIR HOOD","description":"\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eOversized Shipping:  Please note these items require LTL or Oversized shipping from ADV Fiberglass to our shop, This cost has been built into the pricing displayed on the site. \u003cbr\u003eThe price displayed on the site is for in-store pickup, please contact us if you need this item shipped. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e2021-2022 Ford Bronco Ram Air Hood, hand-laid in the USA. Our fiberglass hood comes standard in semi-gloss white. Bolt-on installation.\u003c\/p\u003e\n\u003cp\u003e\u003clabel id=\"details\" for=\"ac0\"\u003eDetails\u003c\/label\u003e\u003c\/p\u003e\n\u003carticle\u003e\n\u003cp\u003eOur aftermarket Ford Hood for 2021-2022 Ford Broncos are handcrafted right here in America to ensure the kind of quality, durability, and craftsmanship you’ve come to expect from Advanced Fiberglass Concepts. Each Bronco fiberglass hood is made specifically for your model and year and designed for a seamless transition between the factory panels and our aftermarket body panels. This Bronco hood are is perfect match with our \u003ca href=\"https:\/\/www.advfiberglass.com\/collections\/ford\/products\/2021-ford-bronco-sasquatch-flares\"\u003e2021 Ford Bronco Sasquatch Flares \u003c\/a\u003e. Carbon Finish Options are in the center section only. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003eHeat-extractor hood\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eFiberglass hood is hand-laid in America to ensure quality\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eMolded specifically to replace Sierra hood\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eDesigned to be long-lasting even during the toughest rides and climates\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cspan style=\"font-weight: 400;\"\u003eMade in the\u003c\/span\u003e\u003cstrong\u003e USA\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eComes standard in semi-gloss white\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ePart Number: AFC 179 (Fiberglass), AFC 179-CFV (Carbon Fiber Vents), + AFC 179-FCFV (Forged Carbon Fiber Vents) \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube-nocookie.com\/embed\/yybOV7tTi5Q\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\" data-mce-fragment=\"1\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eINSTALLATION INSTRUCTIONS - Hood\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll of our products are fairly easy to install. You will need a few hand tools and a few hours of time, depending on the products you have purchased. Advanced Fiberglass Concepts LLC does recommend that a professional install for a seamless fit install these products.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eTools required for most install:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocket set\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eStep 1: Open stock hood and remove bolts holding the hood down.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eStep 2: Remove stock hood from vehicle. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eStep 3: Test fit our aftermarket hood by resting it on the hinge plates. Align it on each side to have appropriate lines. Keep in mind that the hood will sit high if it is not bolted down. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eStep 4: Open the hood, tighten the bolts on the hinge plates to fasten the hood down and close the hood.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eStep 5: After closing the hood, it may require to be adjusted to get appropriate lines. Start by opening the hood to loosen the back hinge plate bolts and close the hood. Pull the hood in the direction you would like (To help make the body lines consistent from driver to passenger side). Slightly open the hood (Make sure to not move it otherwise you will need to restart this step) and tighten the back hinge plate bolts (using the factory nuts) \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eStep 6: Repeat step 5 for the front latch with M6 bolts to tighten the hood in place. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eYou will need to be patient to get a good fit. If the hood sits too low or too high in the front, you can adjust it by turning up or down the rubber height adjuster at the front of the hood located in the core support, or hood. If you need to adjust the back of the hood then loosen the three bolts that are holding the hinge plate to the chassis and push the hinge plate mechanism down and tighten the bolts. This will pull the back of the hood down to align with the fenders. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThese instructions are useful for all hoods sold by Advanced Fiberglass Concepts.—therefore some of the steps may not be needed or should be slightly altered to suit your particular vehicle and product needs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThank you for purchasing our product(s). We hope you are satisfied with the final result.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/article\u003e","brand":"ADVFiberglass","offers":[{"title":"Fiberglass","offer_id":44093184573734,"sku":"ADV Fiberglass Concepts-AFC 179-F","price":1909.37,"currency_code":"CAD","in_stock":true},{"title":"Forged Carbon Fiber","offer_id":44093184606502,"sku":"ADV Fiberglass Concepts-AFC 179-FCFV","price":3205.01,"currency_code":"CAD","in_stock":true},{"title":"Carbon Fiber","offer_id":44093184639270,"sku":"ADV Fiberglass Concepts-AFC 179-CFV","price":3341.39,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/9690\/4998\/products\/a16_800x800_crop_center_2938facb-af9b-437e-a119-b1a22b802058.png?v=1670635388"},{"product_id":"adv-fiberglass-2021-2023-ford-bronco-fenders","title":"ADV Fiberglass 2021-2023 FORD BRONCO FENDERS - FRONT","description":"\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eOversized Shipping:  Please note these items require LTL or Oversized shipping from ADV Fiberglass to our shop, This cost has been built into the pricing displayed on the site. \u003c\/strong\u003e\u003c\/span\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cbr\u003eThe price displayed on the site is for in-store pickup, please contact us if you need this item shipped. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2021-2023 Ford Bronco flared fenders, hand-laid in the USA. Price includes set of two fenders (driver and passenger side). Fiberglass fenders come standard in semi-gloss white. Bolt-on installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOur aftermarket fenders for 2021-2023 Ford Broncos are handcrafted right here in America to ensure the kind of quality, durability, and craftsmanship you’ve come to expect from Advanced Fiberglass Concepts. Each Ford Bronco fiberglass fender is designed specifically for a seamless transition between the factory panels and our aftermarket body panels. These Bronco fender flares are a perfect match with our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.advfiberglass.com\/products\/2021-ford-bronco-rear-quarter-kit\"\u003e2021+ Ford Bronco Rear Quarter Panel\u003c\/a\u003e Kit to create a build that is ready for any terrain.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAllows for larger tires without rubbing issues\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eFiberglass fender is hand-laid in America to ensure quality\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eMolded specifically to replace Bronco fenders\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eDesigned to be long-lasting even during the toughest rides and climates\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cspan style=\"font-weight: 400;\"\u003eMade in the\u003c\/span\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003eUSA\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eComes standard in semi-gloss white\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ePart Number: AFC 183 (2\" Flare 1\" Rise, Bronco R Inspired Design) + AFC 183-L (2\" Fender Liners) (Raptor Liner Is An Upgradeable Option), AFC 185 (5\" Flare 1\" Rise, Bronco R Inspired Design), 185-L (5\" Fender Liners), AFC 187 (8\" Flare 1\" Rise, Bronco R Inspired Design), + AFC 187-L (8\" Fender Liners)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINSTALLATION INSTRUCTIONS: FENDERS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/yybOV7tTi5Q\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll of our products are fairly easy to install. You will need a few hand tools and a few hours of time, depending on the products you have purchased. Also, you will reuse most of your stock hardware during this installation—it is typical to have a few screws and bolts left over, however. Advanced Fiberglass Concepts LLC does recommend that a professional install for a seamless fit install these products.\u003c\/p\u003e\n\u003cp\u003eTools required for most install:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSocket set\u003c\/li\u003e\n\u003cli\u003eDrill and drill bits\u003c\/li\u003e\n\u003cli\u003eScrew drivers (Flat head and Phillips);\u003c\/li\u003e\n\u003cli\u003e120 grit sand paper (optional)\u003c\/li\u003e\n\u003cli\u003eMetal Shears or Sawzall or Plasma Cutter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eStep 1:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eOpen hood and remove bolts holding the fender down under the hood, behind the doors, under the door areas, and behind the bumper.\u003c\/p\u003e\n\u003cp\u003e(Note: not all trucks have bolts located in all the areas mentioned above)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 2:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eRemove plastic liner from fender, marker lights, and headlights.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 3:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eRemove steel fender by skinning the exterior fender from the inner shell from truck once all the bolts have been removed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 4:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSet fiberglass fender in its place and mark the holes that need to be drilled. (Note: Most fenders have markings where to drill, but some do not)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 5:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDrill holes out with a 3\/8 drill bit—the reason for this is so you can move the fender back and forth to align the gap in the hood and door area. To get a consistent hood and door gap, use a mixing stick between door and fender.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 6:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eReinstall fiberglass fender and begin to bolt it down-- but do not tighten all the bolts until you have the right gap. We recommend using a mixing stick to get the same gap at the door and hood area. Once you have the gaps spaced, tighten down the bolts. Do not over tighten! The fiberglass fender will make sounds like it is cracking—this is common as it is fiberglass, so do not worry.\u003c\/p\u003e\n\u003cp\u003eYou will need to be patient to get a good fit. You may need to sand some of the fender down so it does not stick out too far from the rest of the body. This is because fiberglass fenders are thicker than steel. If the hood sits too low or too high, you can adjust it by turning up or down the rubber height adjuster at the front of the hood located in the core support, or hood.\u003c\/p\u003e\n\u003cp\u003ePlease keep in mind, although all of our products are made from factory steel fenders, hoods, and bedsides, there is a difference in fit because of the thickness of the fiberglass compared to steel. Therefore, please be patient when you start this job.\u003c\/p\u003e\n\u003cp\u003eNot all trucks are the same so you may need to remove the grill and lights on some models. If you need further assistance with this installation, feel free to call us—one of our techs will be more than happy to help you.\u003c\/p\u003e\n\u003cp\u003eThese instructions are useful for all fenders sold by Advanced Fiberglass Concepts.—therefore some of the steps may not be needed or should be slightly altered to suit your particular vehicle and product needs.\u003c\/p\u003e","brand":"ADVFiberglass","offers":[{"title":"2\" Flare 1\" Rise \/ None","offer_id":44699468005670,"sku":"ADV Fiberglass Concep-AFC 183","price":2375.98,"currency_code":"CAD","in_stock":true},{"title":"2\" Flare 1\" Rise \/ Fender Liners","offer_id":44699468038438,"sku":"ADV Fiberglass Concep-AFC 183F","price":3167.97,"currency_code":"CAD","in_stock":true},{"title":"5\" Flare 1\" Rise \/ None","offer_id":44699468071206,"sku":"ADV Fiberglass Concep-AFC 185","price":2375.98,"currency_code":"CAD","in_stock":true},{"title":"5\" Flare 1\" Rise \/ Fender Liners","offer_id":44699468103974,"sku":"ADV Fiberglass Concep-AFC 185F","price":3167.97,"currency_code":"CAD","in_stock":true},{"title":"8\" Flare 1\" Rise \/ None","offer_id":44699468136742,"sku":"ADV Fiberglass Concep-AFC 187","price":2375.98,"currency_code":"CAD","in_stock":true},{"title":"8\" Flare 1\" Rise \/ Fender Liners","offer_id":44699468169510,"sku":"ADV Fiberglass Concep-AFC 187F","price":3167.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/9690\/4998\/products\/AFC183_5.png?v=1679628521"},{"product_id":"adv-fiberglass-2021-2023-ford-bronco-4-door-rear-quarter-kit","title":"ADV Fiberglass 2021-2023 FORD BRONCO 4-DOOR REAR QUARTER KIT","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eOversized Shipping:  Please note these items require LTL or Oversized shipping from ADV Fiberglass to our shop, This cost has been built into the pricing displayed on the site. \u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003eThe price displayed on the site is for in-store pickup, please contact us if you need this item shipped.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2021-2023 Ford Bronco 4-Door flared rear quarter kit, hand-laid in the USA. Price includes set of two rear quarter panels (driver and passenger side), door caps (driver and passenger side), and rear bumper caps (driver and passenger side). Fiberglass kit comes standard in semi-gloss white. Bolt-on installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003clabel id=\"details\" for=\"ac0\"\u003eDetails\u003c\/label\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003carticle\u003e\n\u003cp\u003eOur aftermarket rear quarter kit for 2021-2023 Ford Broncos is handcrafted right here in America to ensure the kind of quality, durability, and craftsmanship you’ve come to expect from Advanced Fiberglass Concepts. Each Ford Bronco flare is designed specifically for a seamless transition between the factory panels and our aftermarket body panels. These Bronco fender flares are a perfect match with our\u003cspan\u003e \u003c\/span\u003e2021+ Ford Bronco Fenders to create a build that is ready for any terrain.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAllows for larger tires without rubbing issues\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eFiberglass fender is hand-laid in America to ensure quality\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eMolded specifically to replace Bronco fenders\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eDesigned to be long-lasting even during the toughest rides and climates\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cspan style=\"font-weight: 400;\"\u003eMade in the\u003c\/span\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003eUSA\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eComes standard in semi-gloss white\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ePart Number: AFC 184 (2\" Flare 1\" Rise, Bronco R Inspired Design. Reuses Factory Liners), AFC 186 \u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e(5\" Flare 1\" Rise, Bronco R Inspired Design), AFC 186-L (5\" Rear Liners), AFC 188 (8\" Flare 1\" Rise, Bronco R Inspired Design), + AFC 188-L (8\" Rear Liners).\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e INSTALLATION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yybOV7tTi5Q\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll of our products are fairly easy to install. You will need a few hand tools and a few hours of time, depending on the products you have purchased. Also, you will reuse most of your stock hardware during this installation—it is typical to have a few screws and bolts left over, however. Advanced Fiberglass Concepts LLC does recommend that a professional install for a seamless fit install these products.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTools required for most install:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSocket set\u003cbr\u003e\u003c\/span\u003eDrill and drill bits\u003cbr\u003eScrew drivers (Flat head and Phillips);\u003cbr\u003e120 grit sand paper (optional)\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eStep 1: Open rear doors and remove soft\/hardtop from your Bronco. Loosen and remove the two bolts holding the quarter panel at the rear door section. Loosen and remove the bolts at the bed rail. Uninstall the lower plastic rear bumper trim from the vehicle. Loosen and remove the bolts at rear bumper trim that are holding the rear quarter panel in place. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eStep 2: Mount and tighten the rear quarter panel in position. Reinstall the rear bumper trim.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eStep 3: Check all lines to make sure everything lines up correctly. Adjustments may need to be made to get correct body lines; such as sanding and repositioning the panel. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eStep 4: Apply double sided tape the both the backside of the door caps and rear bumper trim. Press and hold the door caps and rear bumper trims in position against the vehicle. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eStep 5: Approve all body lines and reinstall the soft\/hardtop. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYou will need to be patient to get a good fit. You may need to sand some of the fender down so it does not stick out too far from the rest of the body. This is because fiberglass fenders are thicker than steel. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease keep in mind—although all of our products are made from factory steel fenders, hoods, and bedsides, there is a difference in fit because of the thickness of the fiberglass compared to steel. Therefore, please be patient when you start this job.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIf you need further assistance with this installation, feel free to call us—one of our techs will be more than happy to help you.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThese instructions are useful for all fenders sold by Advanced Fiberglass Concepts.—therefore some of the steps may not be needed or should be slightly altered to suit your particular vehicle and product needs.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/article\u003e","brand":"ADVFiberglass","offers":[{"title":"2\" Flare 1\" Rise \/ None","offer_id":44699655340326,"sku":"ADV Fiberglass-AFC 184","price":2474.98,"currency_code":"CAD","in_stock":false},{"title":"2\" Flare 1\" Rise \/ Add Fender Flares","offer_id":44699655373094,"sku":"ADV Fiberglass-AFC 184F","price":2474.98,"currency_code":"CAD","in_stock":false},{"title":"5\" Flare 1\" Rise \/ None","offer_id":44699655405862,"sku":"ADV Fiberglass-AFC 186","price":2474.98,"currency_code":"CAD","in_stock":false},{"title":"5\" Flare 1\" Rise \/ Add Fender Flares","offer_id":44699655438630,"sku":"ADV Fiberglass-AFC 186F","price":3365.97,"currency_code":"CAD","in_stock":false},{"title":"8\" Flare 1\" Rise \/ None","offer_id":44699655471398,"sku":"ADV Fiberglass-AFC 188","price":2474.98,"currency_code":"CAD","in_stock":false},{"title":"8\" Flare 1\" Rise \/ Add Fender Flares","offer_id":44699655504166,"sku":"ADV Fiberglass-AFC 188F","price":3365.97,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/9690\/4998\/products\/AFC184_9.png?v=1679630878"},{"product_id":"advanced-fiberglass-2021-2023-ford-bronco-2-door-rear-quarter-kit","title":"Advanced Fiberglass 2021-2023 FORD BRONCO 2-DOOR REAR QUARTER KIT","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eOversized Shipping:  Please note these items require LTL or Oversized shipping from ADV Fiberglass to our shop, This cost has been built into the pricing displayed on the site. \u003cbr\u003eThe price displayed on the site is for in-store pickup, please contact us if you need this item shipped.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2021-2023 Ford Bronco 2-Door flared rear quarter kit, hand-laid in the USA. Price includes set of two rear quarter panels (driver and passenger side), door caps (driver and passenger side), and rear bumper caps (driver and passenger side). Fiberglass kit comes standard in semi-gloss white. Bolt-on installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003clabel for=\"ac0\" id=\"details\"\u003eDetails\u003c\/label\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003carticle\u003e\n\u003cp\u003eOur aftermarket fender flares kit for 2021-2023 Ford Broncos is handcrafted right here in America to ensure the kind of quality, durability, and craftsmanship you’ve come to expect from Advanced Fiberglass Concepts. Each Ford Bronco fiberglass part is designed specifically for a seamless transition between the factory panels and our aftermarket body panels. These Bronco fender flares are a perfect match with our\u003cspan\u003e \u003c\/span\u003e2021+ Ford Bronco Fenders to create a build that is ready for any terrain.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAllows for larger tires without rubbing issues\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eFiberglass fender is hand-laid in America to ensure quality\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eMolded specifically to replace Bronco fenders\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eDesigned to be long-lasting even during the toughest rides and climates\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cspan style=\"font-weight: 400;\"\u003eMade in the\u003c\/span\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003eUSA\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eComes standard in semi-gloss white\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ePart Number: AFC 189 (2\" Flare 1\" Rise, Bronco R Inspired Design, Reuses Factory Fender Liners) + AFC 190 (5\" Flare 1\" Rise, Bronco R Inspired Design), AFC 190-L (5\" Rear Liners), AFC 191 (8\" Flare 1\" Rise, Bronco R Inspired Design), + AFC 191-L (8\" Rear Liners)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/article\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eInInstallation\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/yybOV7tTi5Q\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll of our products are fairly easy to install. You will need a few hand tools and a few hours of time, depending on the products you have purchased. Also, you will reuse most of your stock hardware during this installation—it is typical to have a few screws and bolts left over, however. Advanced Fiberglass Concepts LLC does recommend that a professional install for a seamless fit install these products.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTools required for most install:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSocket set\u003cbr\u003e\u003c\/span\u003eDrill and drill bits\u003cbr\u003eScrew drivers (Flat head and Phillips);\u003cbr\u003e120 grit sand paper (optional)\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eStep 1: Open rear doors and remove soft\/hardtop from your Bronco. Loosen and remove the two bolts holding the quarter panel at the rear door section. Loosen and remove the bolts at the bed rail. Uninstall the lower plastic rear bumper trim from the vehicle. Loosen and remove the bolts at rear bumper trim that are holding the rear quarter panel in place. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eStep 2: Mount and tighten the rear quarter panel in position. Reinstall the rear bumper trim.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eStep 3: Check all lines to make sure everything lines up correctly. Adjustments may need to be made to get correct body lines; such as sanding and repositioning the panel. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eStep 4: Apply double sided tape the both the backside of the door caps and rear bumper trim. Press and hold the door caps and rear bumper trims in position against the vehicle. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eStep 5: Approve all body lines and reinstall the soft\/hardtop. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYou will need to be patient to get a good fit. You may need to sand some of the fender down so it does not stick out too far from the rest of the body. This is because fiberglass fenders are thicker than steel. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease keep in mind—although all of our products are made from factory steel fenders, hoods, and bedsides, there is a difference in fit because of the thickness of the fiberglass compared to steel. Therefore, please be patient when you start this job.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIf you need further assistance with this installation, feel free to call us—one of our techs will be more than happy to help you.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThese instructions are useful for all fenders sold by Advanced Fiberglass Concepts.—therefore some of the steps may not be needed or should be slightly altered to suit your particular vehicle and product needs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThank you for purchasing our product(s). We hope you are satisfied with the final result.\u003c\/span\u003e\u003c\/p\u003e","brand":"ADVFiberglass","offers":[{"title":"2\" Flare 1\" Rise \/ None","offer_id":44701588095270,"sku":"AdvancedFiberglass-AFC189","price":2870.98,"currency_code":"CAD","in_stock":true},{"title":"2\" Flare 1\" Rise \/ Add Fender Liners","offer_id":44701588128038,"sku":"AdvancedFiberglass-AFC189L","price":2870.98,"currency_code":"CAD","in_stock":true},{"title":"5\" Flare 1\" Rise \/ None","offer_id":44701588160806,"sku":"AdvancedFiberglass-AFC190","price":2870.98,"currency_code":"CAD","in_stock":true},{"title":"5\" Flare 1\" Rise \/ Add Fender Liners","offer_id":44701588193574,"sku":"AdvancedFiberglass-AFC190L","price":3662.97,"currency_code":"CAD","in_stock":true},{"title":"8\" Flare 1\" Rise \/ None","offer_id":44701588226342,"sku":"AdvancedFiberglass-AFC191","price":2870.98,"currency_code":"CAD","in_stock":true},{"title":"8\" Flare 1\" Rise \/ Add Fender Liners","offer_id":44701588259110,"sku":"AdvancedFiberglass-AFC191L","price":3662.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/9690\/4998\/products\/AFC189.png?v=1679669350"},{"product_id":"advanced-fiberglass-2021-2023-ford-bronco-sasquatch-forged-carbon-flares","title":"Advanced Fiberglass 2021-2023 FORD BRONCO SASQUATCH FORGED CARBON FLARES","description":"\u003cp\u003e\u003cspan style=\"color: #ff2a00;\" data-mce-style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eOversized Shipping:  Please note these items require LTL or Oversized shipping from ADV Fiberglass to our shop, This cost has been built into the pricing displayed on the site. \u003cbr\u003eThe price displayed on the site is for in-store pickup, please contact us if you need this item shipped.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\" data-mce-style=\"color: #ff2a00;\"\u003e2021-2023 Ford Bronco Sasquatch fender flares, hand-laid in the USA. Price includes set of two flares (driver and passenger side). These flares are the factory style made with Forged Carbon Fiber (Also known as Chopped Carbon). Reuses factory hardware.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #000000;\" data-mce-style=\"color: #ff2a00;\"\u003e\u003clabel id=\"details\" for=\"ac0\"\u003eDetails\u003c\/label\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003carticle\u003e\n\u003cp\u003eOur forged carbon Sasquatch flares for the 2021-2023 Ford Broncos are handcrafted right here in America to ensure the kind of quality, durability, and craftsmanship you’ve come to expect from Advanced Fiberglass Concepts. Each Ford Bronco forged carbon fender flare is made specifically for your model and year and designed for a seamless transition between the factory panels and our aftermarket body panels. These Bronco Sasquatch flares are a perfect match for our\u003cspan\u003e \u003c\/span\u003e2021+ Ford Bronco Heat Extractor Hood\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e2021+ Ford Bronco Ram Air Hood.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eForged Carbon\/Chopped Carbon is hand-laid in America to ensure quality\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eMolded specifically to replace Bronco flares\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eDesigned to be long-lasting even during the toughest rides and climates\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cspan style=\"font-weight: 400;\"\u003eMade in the\u003c\/span\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003eUSA\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eComes standard in forged carbon fiber\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ePart Number: AFC 176SF (Front Flares) + AFC 177SF (Rear Flares) \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eINSTALLATION INSTRUCTIONS - FLARES\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll of our products are fairly easy to install. You will need a few hand tools and a few hours of time, depending on the products you have purchased. Also, you will reuse most of your stock hardware during this installation—it is typical to have a few screws and bolts left over, however. Advanced Fiberglass Concepts LLC does recommend that a professional install for a seamless fit install these products.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eTools required for most install:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocket set\u003cbr\u003e\u003c\/span\u003eDrill and drill bits\u003cbr\u003eScrew drivers (Flat head and Phillips);\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eStep 1: Remove Factory Flares by twisting the knobs under the flare and pulling the flare off the vehicle. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eStep 2: Remove all factory hardware from the stock plastic flare.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eStep 3: Reinstall all factory hardware into our forged carbon flares \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eStep 4: Reinstall and secure our forged carbon flare onto the vehicle. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eYou may need to sand some of the material down so the factory hardware is reinstalled and positioned correctly. This is because fiberglass\/carbon is thicker than the plastic flares. \u003c\/span\u003eIf you need further assistance with this installation, feel free to call us—one of our techs will be more than happy to help you.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThese instructions are useful for all fenders sold by Advanced Fiberglass Concepts.—therefore some of the steps may not be needed or should be slightly altered to suit your particular vehicle and product needs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThank you for purchasing our product(s). We hope you are satisfied with the final result.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/article\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"ADVFiberglass","offers":[{"title":"Front Forged Carbon Flares","offer_id":44701938680102,"sku":"AdvancedFiberglass-AFC176SF","price":2771.98,"currency_code":"CAD","in_stock":true},{"title":"Rear  Forged Carbon Flares","offer_id":44701947592998,"sku":"AdvancedFiberglass-AFC177SF","price":2771.98,"currency_code":"CAD","in_stock":true},{"title":"Front and Rear  Forged Carbon Flares","offer_id":44701947625766,"sku":"AdvancedFiberglass-AFC176SF+AFC177SF","price":4850.96,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/9690\/4998\/products\/AFC176SF_7.png?v=1679674412"},{"product_id":"advanced-fiberglass-2022-2023-ford-bronco-raptor-fenders","title":"Advanced Fiberglass 2022-2023 FORD BRONCO RAPTOR FENDERS","description":"\u003cp\u003e\u003cspan style=\"color: #ff2a00;\" data-mce-style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eOversized Shipping:  Please note these items require LTL or Oversized shipping from ADV Fiberglass to our shop, This cost has been built into the pricing displayed on the site. \u003cbr\u003eThe price displayed on the site is for in-store pickup, please contact us if you need this item shipped.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\" data-mce-style=\"color: #000000;\"\u003e2022-2023 Ford Bronco Raptor flared fenders, hand-laid in the USA. Price includes set of two fenders (driver and passenger side). Fiberglass fenders come standard in semi-gloss white. Bolt-on installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #000000;\" data-mce-style=\"color: #000000;\"\u003e\u003clabel for=\"ac0\" id=\"details\"\u003eDetails\u003c\/label\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003carticle\u003e\n\u003cp\u003eOur aftermarket fenders for 2022-2023 Ford Bronco Raptors are handcrafted right here in America to ensure the kind of quality, durability, and craftsmanship you’ve come to expect from Advanced Fiberglass Concepts. Each Ford Bronco fiberglass fender is designed specifically for a seamless transition between the factory panels and our aftermarket body panels. These Bronco fender flares are a perfect match with our\u003cspan\u003e \u003c\/span\u003e2021+ Ford Bronco Rear Quarter Panel Kit to create a build that is ready for any terrain.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAllows for larger tires without rubbing issues\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eFiberglass fender is hand-laid in America to ensure quality\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eMolded specifically to replace Bronco Raptor fenders\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eDesigned to be long-lasting even during the toughest rides and climates\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cspan style=\"font-weight: 400;\"\u003eMade in the\u003c\/span\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003eUSA\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eComes standard in semi-gloss white\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ePart Number: AFC 192 (4.5\" Flare 1\" Rise, Bronco R Inspired Design), AFC 192-L (4.5\" Fender Liners), \u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eAFC 194 (7.5\" Flare 1\" Rise, Bronco R Inspired Design) + AFC 194-L (7.5\" Fender Liners)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/yybOV7tTi5Q\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAll of our products are fairly easy to install. You will need a few hand tools and a few hours of time, depending on the products you have purchased. Also, you will reuse most of your stock hardware during this installation—it is typical to have a few screws and bolts left over, however. Advanced Fiberglass Concepts LLC does recommend that a professional install for a seamless fit install these products.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTools required for most install:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSocket set\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDrill and drill bits\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eScrew drivers (Flat head and Phillips);\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e120 grit sand paper (optional)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMetal Shears or Sawzall or Plasma Cutter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eStep 1:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eOpen hood and remove bolts holding the fender down under the hood, behind the doors, under the door areas, and behind the bumper.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e(Note: not all trucks have bolts located in all the areas mentioned above)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eStep 2:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eRemove plastic liner from fender, marker lights, and headlights.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eStep 3:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eRemove steel fender by skinning the exterior fender from the inner shell from truck once all the bolts have been removed.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eStep 4:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eSet fiberglass fender in its place and mark the holes that need to be drilled. (Note: Most fenders have markings where to drill, but some do not)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eStep 5:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eDrill holes out with a 3\/8 drill bit—the reason for this is so you can move the fender back and forth to align the gap in the hood and door area. To get a consistent hood and door gap, use a mixing stick between door and fender.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eStep 6:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eReinstall fiberglass fender and begin to bolt it down-- but do not tighten all the bolts until you have the right gap. We recommend using a mixing stick to get the same gap at the door and hood area. Once you have the gaps spaced, tighten down the bolts. Do not over tighten! The fiberglass fender will make sounds like it is cracking—this is common as it is fiberglass, so do not worry.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eYou will need to be patient to get a good fit. You may need to sand some of the fender down so it does not stick out too far from the rest of the body. This is because fiberglass fenders are thicker than steel. If the hood sits too low or too high, you can adjust it by turning up or down the rubber height adjuster at the front of the hood located in the core support, or hood.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease keep in mind, although all of our products are made from factory steel fenders, hoods, and bedsides, there is a difference in fit because of the thickness of the fiberglass compared to steel. Therefore, please be patient when you start this job.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eNot all trucks are the same so you may need to remove the grill and lights on some models. If you need further assistance with this installation, feel free to call us—one of our techs will be more than happy to help you.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese instructions are useful for all fenders sold by Advanced Fiberglass Concepts.—therefore some of the steps may not be needed or should be slightly altered to suit your particular vehicle and product needs.\u003c\/p\u003e\n\u003c\/article\u003e","brand":"ADVFiberglass","offers":[{"title":"Front \/ 4.5\" Flares 1\" Rise \/ None","offer_id":44702188568870,"sku":null,"price":2573.98,"currency_code":"CAD","in_stock":true},{"title":"Front \/ 4.5\" Flares 1\" Rise \/ Add Fender Liners","offer_id":44702188601638,"sku":null,"price":3464.97,"currency_code":"CAD","in_stock":true},{"title":"Front \/ 7.5\" Flares 1\" Rise \/ None","offer_id":44702188634406,"sku":null,"price":2573.98,"currency_code":"CAD","in_stock":true},{"title":"Front \/ 7.5\" Flares 1\" Rise \/ Add Fender Liners","offer_id":44702188667174,"sku":null,"price":3464.97,"currency_code":"CAD","in_stock":true},{"title":"Rear \/ 4.5\" Flares 1\" Rise \/ None","offer_id":44702188699942,"sku":null,"price":3860.97,"currency_code":"CAD","in_stock":true},{"title":"Rear \/ 4.5\" Flares 1\" Rise \/ Add Fender Liners","offer_id":44702188732710,"sku":null,"price":4751.96,"currency_code":"CAD","in_stock":true},{"title":"Rear \/ 7.5\" Flares 1\" Rise \/ None","offer_id":44702188765478,"sku":null,"price":3860.97,"currency_code":"CAD","in_stock":true},{"title":"Rear \/ 7.5\" Flares 1\" Rise \/ Add Fender Liners","offer_id":44702188798246,"sku":null,"price":4751.96,"currency_code":"CAD","in_stock":true},{"title":"Both \/ 4.5\" Flares 1\" Rise \/ None","offer_id":44702188831014,"sku":null,"price":5543.96,"currency_code":"CAD","in_stock":true},{"title":"Both \/ 4.5\" Flares 1\" Rise \/ Add Fender Liners","offer_id":44702188863782,"sku":null,"price":7325.95,"currency_code":"CAD","in_stock":true},{"title":"Both \/ 7.5\" Flares 1\" Rise \/ None","offer_id":44702188896550,"sku":null,"price":5543.96,"currency_code":"CAD","in_stock":true},{"title":"Both \/ 7.5\" Flares 1\" Rise \/ Add Fender Liners","offer_id":44702188929318,"sku":null,"price":7325.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/9690\/4998\/products\/AFC192_4.png?v=1679678259"}],"url":"https:\/\/www.raptorracing.ca\/collections\/advfiberglass.oembed","provider":"Raptor Racing","version":"1.0","type":"link"}